VideoSecu Tilt TV Wall Mount for Most 32″-65″ LCD LED Plasma TV Flat Screen, Sturdy Steel Wall Plate Free HDMI Cable and 6″ Bubble Level M43 Reviews
VideoSecu Tilt TV Wall Mount for Most 32″-65″ LCD LED Plasma TV Flat Screen, Sturdy Steel Wall Plate Free HDMI Cable and 6″ Bubble Level M43
- Fits most 32″ to 65″ flat panel screens; VESA compatible up to VESA710x450
- Supports screens up to 165 lbs; Solid sturdy wall plate provides strength and durability
- Rail design allows TV to shift left and right for TV placement adjustment; Adjustable 15 degree of forward tilt
- Content: TV wall mount, HDMI cable, 6″ 3-Axis Magnetic Bubble Level, standard hardware pack
- VideoSecu TV wall mount. Report to Amazon if received counterfeit mount not in VideoSecu box
The VideoSecu MP501B is compatible with LED, LCD, and Plasma TVs and other flat panel display between 32 and 60 inches weigh less than 165lbs. Supports all VESA mounting standards up to 710x450mm and many odd size mounting patterns (mounting holes on the rear of the TV or panel should be no more than 28″ apart horizontally and up to 17.7″ vertically). Over 12 lbs solid heavy-gauge steel construction offers a smooth surface, high-tech look while providing strength and durability. Viewing angle ca
List Price: $ 159.99
Price: [wpramaprice asin="B000NMFCIA"]
[wpramareviews asin="B000NMFCIA"]
VideoSecu Articulating LCD LED TV Wall Mount Full Motion Tilt Swivel Mount Bracket for 22″ to 37″ Flat Screen with VESA 100 200 Mount Pattern 1XE
- The arm can extend out up to 20″. Swivel +/-170 degrees and tilt +/-15 degrees
- Fits VESA 75×75/100×100/200×100/200×200 compliant; Mount plate is 8.5″x8.5″
- Load capacity up to 55 lbs; Post-installation level adjustment allows the TV to perfectly level
- Fits most TVs 22″ – 37″ LCD LED TV monitor ( check VESA and weight )
- Cable management design; Standard hardware pack included
The VideoSecu articulating mount support most mid size flat panels up to 55 lbs (25 kg) with VESA 75×75/100×100/200×100/200x200mm. This is one of the popular medium size TV mount, with heavy duty steel construction. The two-link arm design provides up to 170 degrees of swivel, 15 degrees tilt up or down, and 3″-20″ extension, make it easier for get perfect viewing angle. It also offers 5 degrees roll adjustment for level the mount in different positions. The on arm cable management ring system d
List Price: $ 145.99
Price: [wpramaprice asin="0972683275"]
[wpramareviews asin="0972683275"]
(11374)
(12388)
Solid mount and a good bargain.,
Mounted my Samsung 50″ plasma using this mount. My display is about 70 pounds.
Installation was fairly simple. The back plate is 30 inches wide, so you will only be able to get 2 studs max. Important points:
1. It is very important to make sure the lag bolts drill into the studs.
2. The included hardware is iffy, so go spend the $5 at your local hardware store and get some better bolts.
3. The level on the back plate is not 100% accurate, so make sure to use your own.
The important thing to to measure where you want your holes and then measure them again and then make sure everything is level.
The construction of the mount and rails felt very sturdy.
For those that have never mounted a tv before there are 2 parts. A back plate that bolts on to your wall and then 2 rails that bolt onto the back of your display. You then place your display on the backplate. The rails have hooks to secure it onto the plate and then screws at the bottom to make sure it doesn’t come off.
Distance between the back of the display and the wall is about 2.25 inches. This is fairly tight and makes it difficult to hook up cables, so make sure your cables are hooked up before mounting the display.
Was this review helpful to you?
|PURCHASE THIS MOUNT!,
I originally purchased a mount from Best Buy for almost $200 and when I got it home I decided to check Amazon for a better deal.
This was the outcome of a very short search. I ordered this mount and it showed up at my house in two days. This item is very well made and nicely finished in flat black powdercoat. I hung a 52″ lcd on it in about 1/2 hour time.
DO NOT spend $200 on a wall mount!
By the way….the Best Buy mount went back the next day.
Was this review helpful to you?
|Excellent Mount – except for the wall screws.,
I was a little concerned about purchasing this mount because it was so much less expensive than many of the others. I don’t have extensive experience with HD TV wall mounts but this one does the job well and I am NOT disappointed. My only complaint is that the screws that it comes with for attaching it to the wall are crap. Two of them broke when I was screwing them into wooden studs – not plaster or concert but simple 2×4 wall studs! As a result my confidence level in the screws diminished and I went to the hardware store to buy new more robust ones. I still gave it 5 stars because other than that it as excellent value and I do not see any reason to buy a more expensive flat panel wall mount.
Was this review helpful to you?
|Excellent low cost movable arm,
This flat panel mount is adjustable and very cost effective, an excellent product for the money. This arm comes with all needed mounting hardware for either masonry or wall stud mounting as well as a set of 4 screws for several sizes of panel mounting screws. It also comes with a small wrench for two different sizes of hex heads on the arm and an allen wrench for one of the arm adjustments. It is at least a two man operation to attach the flat screen after the arm is attached to the wall. I mounted mine on a stud in the wall. For stud mounting you use two of the six mounting hex head lag screws that come with it. It doesn’t say exactly in the directions but you should use a 1/4″ drill bit to pre-drill the holes in the stud. I would not recommend trying to use the included hex wrench to tighten down the wall mounting lag screws, you need more leverage to tighten it than it provides; use a crescent wrench or other longer hex wrench. I used a stud finder to locate the studs accurately. Make sure you do not have obvious pipes or electrical going through the wall at the chosen location. They can throw off some stud finders. If you want to quickly adjust one of the arm adjustment screws it also contains a replacement screw that has a slip bar top lever so that it can be loosened and tightened without a wrench. There is one optional cable management loop that attaches to the bottom of the middle of the arm. It could use one more at the wall, but that is easy to improvise. The flat panel we have is 32″ and 25 lbs. and works well for the mounting arm.
I really like this product for this price.
Was this review helpful to you?
|Great Mount,
I was hesitant because of the price but after looking at the reviews I decided to go ahead and purchase one. This is the first time I mounted a TV on the wall so I didn’t know exactly what to expect. I put a 32″ Toshiba LCD on it. Mount is strudy and has good adjustments. Installed it in about 20 minutes. Works great and I would definately recommend this for a low cost alternative for mounting a tv.
Was this review helpful to you?
|Looks good, does the job,
I am using this mount for a 27″ LCD in my bedroom. Using a swivel mount with tilt works great for almost any room layout. The black powder-coat paint matches the TV, and looks great. Adjustment and locking is easy with the included hex wrench. I would rate this “5 stars” if the mounting screws were better. Made from relatively soft steel, the screw head strips very easily. After ruining one screw, I replaced it with a large black deck screw. It might be advisable to drill small pilot holes before attempting to drive the screws.
Word of caution: If you do not drive the proper mounting screws into the center of a wall stud, if you exceed the specified TV weight limit, or if you try to get by with a really cheap swing arm mount, you may be signing a death sentence for your $500 TV (and perhaps yourself)!
Was this review helpful to you?
|